anybody runnin this cam

[Anonymous]

HYDRAULIC ROLLER-Xtreme Energy XE-R design for large cubic inch engine LS6 LS1. RACE ONLY APPLICATIONS

2800 to 7200 RPM

287 289 ADV DURATION

238 240 DURATION @ .050

.605int lift .609exh lift

112° LSA

Requires upgraded valve springs 918-16. These are listed in our Ebay store

looking to get this for the 6.0 will the stock roller lifters work and is anybody runnindg this cam with a carb

 

[Roller406Bu]

Stock lifters will be fine, i'm running them with a larger magic stick 4..

 

[Anonymous]

you have any time slips on motor with 6.0 :?:

 

[Roller406Bu]

no not yet...

 

[Darracq]

If i ran that cam i would want more compression than stock and about 4500 stall, even with a stock cam 4000 plus works good. You might look for something a little smaller, depending on what you are wanting to do.

 

[455_82malibu]

my brother runs this cam with his carbed 6.0, l92 heads, it runs great and it idles smooth, has a nice RPM power spread.

Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 2,200-7,400 RPM
Intake Duration at 050 inch Lift: 228
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 228 int./230 exh.
Advertised Intake Duration: 281
Advertised Exhaust Duration: 283
Advertised Duration: 281 int./283 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.571 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.573 in.
Valve Lift with Factory Rocker Arm Ratio: 0.571 int./0.573 exh. lift
Lobe Separation (degrees): 112
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Computer Controlled Compatible: No
Grind Number: XR281HR