PLEASE READ: Malibu Racing Lives!!

Search found 56 matches

by prostreet66
Sun Sep 10, 2017 9:48 pm
Forum: Drivetrain Technical
Topic: F body t10 trans
Replies: 1
Views: 738

F body t10 trans

How good are these trans? My buddy has one that's supposed to be rebuilt. Was thinking about stuffing it into my 64 behind my 327
by prostreet66
Sun Sep 10, 2017 2:54 pm
Forum: Autobody/Paint Technical
Topic: Fresh paint chip repairs
Replies: 3
Views: 1030

Re: Fresh paint chip repairs

Thanks for the reply. The couple of small chips i have are from installing the window sweeps and side stainless. I couldnt use tape on these spots sadly. I have base left but I figured i would need to dab some clear on it. I wish photo bucket would let me post pics not sure what's up with their site...
by prostreet66
Sun Sep 03, 2017 5:29 pm
Forum: Autobody/Paint Technical
Topic: Fresh paint chip repairs
Replies: 3
Views: 1030

Fresh paint chip repairs

I had my chevelle painted last winter. Ive been slowly working at putting it together. Im really careful but still have a couple minor chips from installing window felts and other parts.... are these paint pens with clear coat on the ends a ok deal? What do you all use?
by prostreet66
Fri Jul 24, 2015 6:31 pm
Forum: Drivetrain Technical
Topic: What's this noise?
Replies: 3
Views: 983

What's this noise?

Well I've put maybe 100 miles on my motor it wasn't an overhaul just heads. Cam etc...I drove it 40 miles to the headliner shop and when I picked it up i no iced a tick tjat o figured was an exhaust leak...well a few miles later ir got louder...so I stopped and took it back until I can haul it home....
by prostreet66
Mon Mar 16, 2015 12:14 pm
Forum: Transmission Technical
Topic: powerglide HELP
Replies: 2
Views: 1778

Re: powerglide HELP

I'm going to check the side of the trans where I was manually shifting. If I rememeber rigjt I can loosen it there and maybe it slipped there and needs to be set back in place? Just a thought
by prostreet66
Mon Mar 16, 2015 6:40 am
Forum: Transmission Technical
Topic: powerglide HELP
Replies: 2
Views: 1778

powerglide HELP

Pulled a bone head move when I took motor and trans out. I left the linkage hooked up where It drops down through the floor on my 64 chevelle....when I reinstalled it I had to use a pry Bar to get it to hook back up (trans linkage )... I went to drive it and it shifted hard had to play with it to go...
by prostreet66
Sat Dec 06, 2014 11:28 am
Forum: Autobody/Paint Technical
Topic: hot rod flatz
Replies: 0
Views: 1075

hot rod flatz

I have searched and done some reading. Alot of mixed reviews on the product. Anyone use it lately has it changed? Better or worse? I'm working on my 64 and would like to get it one solid color my paint is shot! I am not loaded and can't drop a ton of coin on paint. I really like the look of hot rod ...
by prostreet66
Mon Feb 24, 2014 10:52 am
Forum: Drivetrain Technical
Topic: Still stuck on cam choice
Replies: 6
Views: 1623

Re: Still stuck on cam choice

http://www.jegs.com/i/Lunati/638/101107 ... ProductId=" onclick="window.open(this.href);return false;
by prostreet66
Mon Feb 24, 2014 10:41 am
Forum: Drivetrain Technical
Topic: Still stuck on cam choice
Replies: 6
Views: 1623

Re: Still stuck on cam choice

Thats the one i was set one. I was looking at a kit...new timing set...cam. lifters . Springs..valve seals...etc 405 bucks for it. All do you think that will have a nice lump to it...with some flowmasters or dynomax mufflers
by prostreet66
Sun Feb 23, 2014 6:17 pm
Forum: Drivetrain Technical
Topic: Still stuck on cam choice
Replies: 6
Views: 1623

Still stuck on cam choice

I have a bone stock 402 big block. I purchased a performer rpm intake for it and I'm having. Hard time selecting a cam. One guy says one thing the next feels another.....I have a buddy who's dad put a cam with .575 degrees of lift and loved it...was stock minus the intake and headers....I plan to ru...
by prostreet66
Fri Sep 27, 2013 6:03 pm
Forum: Drivetrain Technical
Topic: 402. Big block cam info
Replies: 2
Views: 832

Re: 402. Big block cam info

yeah it is, u have any experiences with this cam? it would still have stock heads etc...would it give it a noticeable rumble?
by prostreet66
Thu Sep 26, 2013 6:21 pm
Forum: Drivetrain Technical
Topic: 402. Big block cam info
Replies: 2
Views: 832

402. Big block cam info

Picked up a bone stock 402 low mileage....Im considering maybe upgrading the cam to give it a lot more performance and a nice lumpy tone....this car will be a 100% driver...I'd like to keep the stock quadrajet for now....building on a budget...any tips or info or should I leave it alone and drop it in
by prostreet66
Sun Jul 07, 2013 9:55 am
Forum: Autobody/Paint Technical
Topic: new paint question
Replies: 1
Views: 873

new paint question

Im looking to get my 66 painted around september or so....which would have it back to me by december or november...i dont have a heated shop and it gets pretty cold in iowa, will this be an issue with fresh body work and paint? Any tips would be great
by prostreet66
Fri Mar 15, 2013 9:50 pm
Forum: General Discussion
Topic: What did U do to your G-body today??
Replies: 3476
Views: 233319

Re: What did U do to your G-body today??

Walked passed it a few times lol
by prostreet66
Fri Dec 28, 2012 12:33 pm
Forum: MalibuRacing Gallery
Topic: Exhaust Video's
Replies: 157
Views: 55808

Re: Exhaust Video's

Built 350 3inch exhaust with dynomax race bullets
https://www.youtube.com/watch?v=axOIwhb ... ata_player" onclick="window.open(this.href);return false;