Search results

  1. INTHE10s

    rear springs

    I run 12" 150lb. Sat too low with 12" 130's
  2. INTHE10s

    Internal Tank Baffles

    If you start with a Grand National tank it will have the baffling.
  3. INTHE10s

    What did U do to your G-body today??

    Go on Amazon and get some Tomcat. Works like champ!
  4. INTHE10s

    Maliburacing gallery (Post your car)

    Create an account on imgbox.com, upload your photos (I use 350x350 resized), copy and paste the BB code into your post and you should get a small photo that people can click to see full size.
  5. INTHE10s

    Short rear shocks??

    I use QA1 double adjustable coil overs without the springs and I converted the top with QA1 BAR350K T-Bar Kit. Shock specs: Compressed Height: 12-1/2" Extended Height: 18-3/4" Ride Height: 15-1/4" to 15-3/4" Spring Length: 14" Mounting: Bearing
  6. INTHE10s

    So confused on a return system pluming

    If you click that link then look at suggested parts the an adapters are there. I think those are 6an but they might have them in 8 also.
  7. INTHE10s

    So confused on a return system pluming

    Scenario 1 is the more expensive route. You'll need a return style regulator, filter and braided line from the back to the front and then back again. The regulator will have an inlet port, a port to feed the rail, and another to return fuel to the tank. Scenario 2 is easier and less expensive...
  8. INTHE10s

    What did U do to your G-body today??

    Slowly going back together.
  9. INTHE10s

    What did U do to your G-body today??

    Getting ready for new top end!
  10. INTHE10s

    Spherical control arm bushings

    They're in the housing so I couldn't. Try contacting the seller on ebay.
  11. INTHE10s

    Spherical control arm bushings

    I doubt these will work for you but I have these in my 8.5 housing. You need something meant for the upper housing otherwise the upper control arms won't fit. https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5338652022&icep_item=290815844218
  12. INTHE10s

    Spherical control arm bushings

    Those bushings are meant for the lower control arms not the housing.
  13. INTHE10s

    What did U do to your G-body today??

    Installed my Innovate Wideband O2
  14. INTHE10s

    Post your anti roll bar pics!

    Spohn Pro-Series anti-roll drag sway bar.
  15. INTHE10s

    gn gas tank and sending unit help

    Tank and sender are made by Spectra. Tank is GM307C and sender is FG156A. Guage shouldn't be a problem and the filer mod is your choice. BUT....most people who don't do it regret it afterwards!
  16. INTHE10s

    What did U do to your G-body today??

    ^^Pretty slick^^
  17. INTHE10s

    Horn button help - Monte Carlo steering wheel

    http://www.montecarloss.com/community/ubbthreads.php?ubb=showflat&Number=912848
  18. INTHE10s

    New Mickey Thompsons?

    Saw something about them on YB. IIRC the new tire will replace the original Mickeys.
  19. INTHE10s

    Autometer Gauges and Fuses

    I'm with Tommy. A fuse for each so you don't lose all your guages if it blows.
  20. INTHE10s

    What did U do to your G-body today??

    Thanks!