Search results

I bought a set of bucket seat brackets from mikesmontes, and ive look ed at other pictures of floor pans that shows how they go in. My dilemma is that my bucket seats that are original malibu seats to another car has the same outside mounts, but the inside mounts has two holes in the front and...

Nvm I found a pair on GBodyParts.com that i'm going to order, Little pricy but when theres no other source, ya gotta get em. Haha.

Does anyone know of a place that sells the front corner lamp for turn signals on a 79 two door? OPGI only has a drivers side same on ebay, anywhere else to look? I need a passengers side asap but i figured id get a pair just to put a new set on. Thanks Travis.

dixie didnt give an option of cornering lamps or not, it was either a column shift or floor shift car that told the difference between the switchs, that shouldnt affect it. so i should be looking for a t/s that is without cornering lamps? correct? how can ebay sell em around 25 dollars and dixie...

Im running weld prostars all around my fronts are 14x7 with the center cap, when i go around a corner slowly. EX. pulling in the driveway, it sounds like the wheel is riding on the center cap, you hear the plastic, what could be causing this?

Bigbadbu what you posted is the face with the gauges i know where to buy that im talking about the box that that mounts to.

Dixiemontecarlo sells two a coulmn shift and floor shift. ebay sells a mess of em but it says with or without cornering lamps. I don't know what to buy without getting the wrong one? Help? Is there a difference between column shift and floor shift? I can't think of anything that would be different.

possibly that looks like the main box im talking about but i seen before someone had that and the face with all autometer gauges classic dash.com looked right but it wasnt there. if anything id buy that main box and dixiemontecarlodepot.com has the face with all autometer gauges and leds, and...

well i was looking at one that looked original just had all autometer gauges, but it wasnt just the face plastic with the shadow box and gauges, it was the whole thing that screws to the main dash piece maybe these are the same im talking about. not any good pictures on websites to tell what im...

I remember seeing somewhere that someone was selling the square box that you mount the gauges in and the face plate that has the headlight, wiper switch, and vent in. The whole big square assembly. Anyone have any clue to who sells this or where i can find it again? Thanks, Travis.

What all needs disconect to get the body off the frame? How long does it take roughly?

the soffseals are hard the whole way around except by the back of the door where it mounts from the bottom of the glass up about 2 inches it soft and hollow, i can slip my finger in thats where it leaks also, other then that i love the soffseals. what are the metro seals like? are they firm the...

what else would i need with that particular assembly? i saw another one that sold. painted fresh gloss black and had the brake light switch and another one to it. the other one looks like i need a bunch of other parts just for the assembly.

Yeah i read that article but it seems to make it seem more complicated than it really is. doesn't the assembly just bolt right where the brake pedal is now, and just hook up the linkage then adjust the compression length to engage the clutch, they say its geometry intense. i need a run down not...

Okay so ive read alot of post in here about t56 swaps and blah blah blah. Too much BS for me to follow and then ppl talk about different things. SO im asking everyone on here, i have a 79 malibu, 267 followed by a th350 3 tree. im getting a 350 to build up and im asking how do i go about...

I ordered 15x8 with a 3.5 B/S that i will put 275's on i know it will work other people have done it without using spacers, or any other mods. although air shocks will be needed to stiffen the back up.

Well, i Figured 10 would be too wide with my 7.5 gm rear, althought i know a guy that runs 10 inch on his car they come to the end of the body, wouldnt tuck in, so he has heavier duty springs with air shocks at 20 PSI to hold the car up so the tires dont rub. All spring holds it up, not too much...

hmmm well with the turbocad drawing i did, it says they will be 1/2 inch away from frame, and thats the edge of the tire. Everything is to scale EXCEPT the measurement from the mounting point on the axle to the frame. thats the last dimension that id need to see if they'd fit, although a factor...

What the title says, Can i run 15x9 with 4.5 B/S on stock 7.5 rear with 275.60.15's? According to the turbocad drawing i did with everything to scale, i can do it, tight fit but can be done, also im not drag racing, It's a daily driver right now. If theres clearance issues i will go to air shocks.

nvm its an 8 lug wouldnt work lol. oh well so could i fit a 15x9 with 275 60's on my stock 7.5 rear? We did a turbocad drawing of it with the dimensions, and the tire would be about 1/2 inch away from rubbing the frame. but i didnt get the measurement from the frame to the inside of the well.