Search results

loaded up only on converter

LS1 6.2L,950 hp series carb.pump gas,25cc accel pumps,WOT off the line and it stumbles,i am told i need bigger squirters like the ones used in alcohol applications,what do you think?Also,i read that Holley is only right now making true 950 carbs,the old one like i have is more in the 850-870...

1st pass with no tune,no trans brake,shitty driving,and a shitty 60ft.(1.88)and still came up with an 11.50 @ 120mph.this car should run high to mid tens on LSX small block HP only!

what intake?

max frame notch all the way to the body bushings,Comp Engineering mild steel tubs,TRZ ARB, chromoly cage,and lateral supports going frame to frame above the 9in.rear on this car.It was a lot of work and took me forever.15x10 wheel 6.5 in. bs,Strange 9in.QP housing,3:90 pro gear,narrowed 1 in.on...

if i had to take a guess this 382 is good for 470-480 to the wheels,and about 520 ish at the crank.Going to some 1/8 mile shakedowns this week,i will post progress.

Has lots of power,dyno numbers coming soon.

The ones that stuck in my head the most was the Meziere WP,and spacer kit for the front drive to fit.I ordered a 29x12 Hoosier tire and Flowmaster 3 in. 10 series mufflers going straight to FBody Pacesetter ceramic headers today.

this motor has L92 heads,intake and a 950hp.series carb w/ Callies/Lunati internals.Yes, it is way different but would not recommend it if you are on a budget,LS stuff will clean you out quick.

streetcar!

http://www.yellowbullet.com/forum/showthread.php?t=512334

Think i found it,it is not a common size so they are expensive.it is a 29X13.5 ON A 10 INCH wheel.The tip of the tire should be tucked up in the wheelwell,i will post pics when i get them on there.

Forgot to add the 15X10 wheel has a 6.5in.backspace.

I have a 325/50/15 on the 87SS in the sig and i love the 325mm width,however i have about an 1 1/2 of space between the wheelwell and top of the tire.Would a 28X11.5 tire give me more sidewall?Car is lowered 2 in. already,has a mini tub,frame rail notch,Strange 9in.stock length and a 3:90 gear...

No,i will check it out,thought i could get one off LS1Tech by now but it is slow.

Looking for an LS1 starter if anyone has one,98-02 FBody,And Corvette would be fine .

Very clean,i have a similar build in this section,after seeing that color combo my valve covers will now be powdercoated black and the intake will be left uncoated plain. ](*,)

TH350 works fine you just need the Flex Adapter plate,the 98 LS1 motors had oil passage issues causing bad oil pressure but other than that making 11 sec.Et's is simple on an LS1,The SS in the sig ran 11:90 solid and was my daily driver with a cam,LS6 intake and small bolt-ons.Any 98-FBody LS1...