Does anyone know the length on rear lower control arms ?

[Anonymous]

I am installing a Quick Performance 9" in my malibu.
Im not going to get into all the issue of this installation till its complete and rolling.
The reson I ask this question is :
A. The posts that your lower shock mounting point is at a angle and will not allow the shock bushing to slide over. Needs to angle a 1/4 "
down.
B. The pinion angle is - 10 degrees .
C. I have stock boxed upper arms but SSM lower arms less the the lowering bracket. I wondering if the SSM arm is longer than stock?

Any thought would help.

Thanks Fred

 

[Brian79]

Total length is 22 1/4 and center to center is 19 1/4 Had a set laying around, hope this helps

 

[Anonymous]

Just to update the installation of the QP 9". The SSM lower bars are 3/4 " longer than stock and this was my pinion angle and shock mount Issue. You have to use the lowering brackets with the SSM bars. I wanted my car to work better in the turns so I installed a aftermarket LCA in the stock location on the rear.
Thanks for the 1 answer I did get to help the project roll forward.

Fred