ENGINE BAY PAINT??

[SWIFT NuTz]

Hey guys,
I am pulling my motor again and was thinking about just cleaning it all up in there, basically want to just flat black the engine bay to keep anything from rusting/weathering badly as well as some wire managment. The question is, what paint should i be using for the metal/plastic thats in the engine bay (metal being the frame and firewall, and plastic being the wheel wells and other stuff) Opinions are appriciated greatly!! Thanks


-Steve

 

[79izfine]

heres what i used VHT engine paint on the frame and dupli-color wheel paint on the firewall went with the rattle can cuz i am cheap so far its holden up well

 

[melloelky]

i used two coats of dp epoxy with three coats of dcc single stage.i blocked it out and put two more on.that epoxys go stuff,it works well on plastics too.