I'm using this motor mount set up (transdapt part #4595 (1" setback) and moroso solid frame mount #62630) with cts-v oil pan, and the pan is hitting the drag-link. Has anyone else had this issue ? suggestions appreciated or photos of this same set up installed would be helpful.
help with cts-v oil pan and drag link clearance
- Thread starter cmalibu12
- Start date
Can you shim the mounts up to clear? I have also heard of people grinding the holes out on the solid mounst where it goes to the frame elongating the holes then welding thick washers over them to push the motor up slightly to clear things.
Thamks for your input sbmalibu, some 1/4 inch plate was all I needed for shims and its fits nice now!
