lq4 intake to ls6 intake

[blubaldmontess]

Quick, stupid question. I was putting the engine in today, and the alternator didn't fit under the hood, nor did the intake off the lq4. I'm wondering if an ls1 or ls6 intake will be a direct bolt on, and if so, do I need to do anything to the wiring harness (already cut up for the truck motor into the monte ughhh). I'm trying to find the front end accessorries to put on the front to aliviat that problem, and found the intake below. I've already got myself a throttle body, but this looks like a pretty decent deal, so any help you guys could provide would be greatly appreciated...basiclaly will it need anything else to put onto it, such as fuel rails, or can I reuse the old ones, as well as the coil packs/wires?

ls6 intake/Fast TB
http://atlanta.craigslist.org/pts/1065935284.html

Otis

 

[alowerlevel]

The injector plugs in the harness are different, but you can just change them to the ls1 connectors. The injectors and fuel rail are different also. Since you already have a t/b, you can pick up a used ls6 intake off LS1tech for around $350, or you can just get a regular non-ls6 intake for $50-75, (theres one f/s on here right now too http://www.maliburacing.com/forum/viewtopic.php?f=10&t=80177)