Need g-body LSX Frame notch pics

[veltboy618]

Could someone please post pics showing where they notched the frame on a g-Body car for the A/C compressor lines & for the stock LS1 oil pan to clear. Thanks!

 

[SLICK78]

I know I seen them somewhere in this thread
http://ls1tech.com/forums/conversions-hybrids/750522-g-body-swap-thread-35.html

sadly working 16 hour days i'm to lazy to look and see what post

 

[SLICK78]

or here is a relpy to your thread over on ls1tech

I cut roughly 2 inches deep,guessed at the length and flipped the piece that i cut out,and re welded it back in.

 

[Ponjohn]

Over on LS1Tech there is a Malibu thread.

According to the info in that if you use all the BRP hardware the lower a/c compressor location will work with F-body accessories.

 

[veltboy618]

Will a compressor form a 5.3 work with f-body accessories or do I need a compressor from a F-body?

 

[pkstang]

hi guys

is the frame notching only required when running a/c?

 

[79loserbluebu]

Yes only when running AC.

I think both the truck and car compressors will fit with the BRP mounts but I'm not 100% sure, in the instructions they used F-body accessories.