Using a three wire alt with just one wire????

[eldabo]

I rewired my car waiting on my new motor and have taken all the old stuff out of the dash. I at this point do not a have a volt meter .How can I hook up the alt thats a three wire and make it a one wire?


Thanks

David

 

[Goob]

Change the regulator to a one-wire. (self energizing)
Should cost ya about $15 for the part, easy install.

 

[eldabo]

Is that inside the alternator?

 

[Goob]

Yes, find a local rebuilder for the part, or search online for your favorite source.

It's a fairly easy install.....requires the same skills as "clocking" the unit for mounting.
Insert a toothpick or spray tube from a can of WD-40 to hold the brushes when you put the halves back together.

 

[grizwald]

i took an old alternator apart just to check it out before. i cleaned it up, put it back together, and used it on my car with no problems. goob's right....it's very easy even without the tips from someone who has done it before. you'd figure it out.

 

[eldabo]

Thanks thats good i was thinking i would have to rig it or buy a new one.

 

[454RAT]

isnt one of the wires (plug) for one of the idiot lights in the dash?

 

[mild big block]

isnt one of the wires (plug) for one of the idiot lights in the dash?

yes...the small wire..Kevin you knew that!!