Page 1 of 1

what 3.8 do i have

Posted: Wed Sep 21, 2011 6:25 pm
by dragonmaster093
its factory in my 79 cutty wagon has front distrbutor on the drivers side. need to know since thinking of cam intake swap dont know if even or od fire for ordering a cam. im sure valve cover dont much matter but look like a sbc just smaller

Re: what 3.8 do i have

Posted: Wed Sep 21, 2011 10:56 pm
by DOUG213XRJ
Its a Buick 3.8 L 231 C.I .

Doug

Re: what 3.8 do i have

Posted: Wed Sep 28, 2011 12:39 pm
by dragonmaster093
is thar even or odd fire for when i order a cam?

Re: what 3.8 do i have

Posted: Wed Sep 28, 2011 3:05 pm
by DOUG213XRJ
Even-fire.

Doug

Re: what 3.8 do i have

Posted: Thu Oct 06, 2011 2:09 pm
by dragonmaster093
will the trans bell housing be ( hope hope) uni patern or bop or chevy. got a 305 i can put in as long as i dont have to replace trans thanks

Re: what 3.8 do i have

Posted: Thu Oct 06, 2011 7:15 pm
by DOUG213XRJ
dragonmaster093 wrote:will the trans bell housing be ( hope hope) uni patern or bop or chevy. got a 305 i can put in as long as i dont have to replace trans thanks
You can check the transmission for a dual bolt pattern, But I wouldnt count on it.

Doug

Re: what 3.8 do i have

Posted: Wed Feb 08, 2012 2:45 pm
by 80ECLT
I think the factory 1979 trans for a V6 231 will be BOP pattern only. the later models had dual patterns.

Re: what 3.8 do i have

Posted: Sat May 19, 2012 10:43 pm
by dragonmaster093
whats the best parts to wake up this lil sucker? what carb can i use in place of the dual jet thats on it? its that few yrs only (that ive found) 1/2 a quadra jet. seems like it was a v6 only carb and didnt stick around long there are rebuild kits for it but due to odd shape an after market air cleaner has to have a hard to find adapter. if an other carb like carter or holley 2 barrel carb will bolt on that would be good

Re: what 3.8 do i have

Posted: Wed May 23, 2012 10:00 am
by dragonmaster093
anyone

Re: what 3.8 do i have

Posted: Fri May 25, 2012 4:14 pm
by Darwinskeeper
Sorry, but like most of the people on this board I really have no experience with normally aspirated Buick V6s. In my case, I have a lightly modified Chevy 4.3 V6 (3/4 of a Chevy 350) in Darwin and a tired, stock Chevy 3.8 (229) in White Lightning.

I'd imagine that the basic mods I used on Darwin, a small 4bbl carb, a dual plane intake manifold, mild head cleanup, a mild camshaft, headers and a dual exhaust would help, but I have no clue as to the specifics for the Buick V6.

You might use the browser of your choice and see what's out there for the Buick V6. I did a little looking awhile back and most of the info I found was for the odd-fire Dauntless 225 that was used on Jeeps.

John E.

Re: what 3.8 do i have

Posted: Sat May 26, 2012 8:52 am
by toyodajeff
I used to have a dualjet on my v6. It had the d shape air cleaner opening. the stock filter was about 9 7/8 inches diameter. If you cut out the air cleaner bottom around the air filter base you can run whatever 10 inch chrome top you want. It looks like the open element filters you buy.

Image

Re: what 3.8 do i have

Posted: Sat May 26, 2012 9:09 am
by 80Grand_LeMans
GN turbo swap?

Re: what 3.8 do i have

Posted: Tue Sep 25, 2012 6:46 am
by bukweet
If you can find a late 70's early 80's Big body Buick with the 252 V6, you just might find a 4 bbl intake that will also fit the 231.
Factory and heavy but a 4 bbl none the less.
Edelbrock used to have a cam/intake package for this engine as well.




8)
bukweet

Re: what 3.8 do i have

Posted: Sat Sep 29, 2012 8:32 am
by LS6 Tommy
dragonmaster093 wrote:its factory in my 79 cutty wagon has front distrbutor on the drivers side. need to know since thinking of cam intake swap dont know if even or od fire for ordering a cam. im sure valve cover dont much matter but look like a sbc just smaller

Well, the front distributor tells me Buick 231. The valve cover description sounds like Chevy 229, but it can't be with a front distributor, so Buick it is... All 78+ Buick 3.8's are even fire.

Tommy