I have a Mallory Comp 140 fump, Mallory Comp 140 filter and regulator. Is this enough for my motor. The bottom end is together, here it is.
383
4 bolt main 350 30 over
Scat forged 3.75 stroke crank
Lunati forged 6" rods
Wiseco forged pistons (pt# PTO27H3)
Lunati roller cam 4-7 swap (grind# 47RRA272H280G106)
Cloyes timing chain and cover
Stefs pan, pump and pickup
Will have brodix track 1s or dart pro 1 220s or afr heads and brodix 1000 intake. Not sure of carb, friend wants me to run a dominator but not sure if that is right for my combo. Will also be running either stepped headers 1 3/4 to 1 7/8 or 1 7/8 headers. Any suggestions or comments are appreciated. Thanx JOHN
383
4 bolt main 350 30 over
Scat forged 3.75 stroke crank
Lunati forged 6" rods
Wiseco forged pistons (pt# PTO27H3)
Lunati roller cam 4-7 swap (grind# 47RRA272H280G106)
Cloyes timing chain and cover
Stefs pan, pump and pickup
Will have brodix track 1s or dart pro 1 220s or afr heads and brodix 1000 intake. Not sure of carb, friend wants me to run a dominator but not sure if that is right for my combo. Will also be running either stepped headers 1 3/4 to 1 7/8 or 1 7/8 headers. Any suggestions or comments are appreciated. Thanx JOHN
