Search results

Re: Hotrod to ####'s Truck Arm Suspension Hey Norm, I didn't mean to be taking anything away from the truck arm design as I said it's been proven to be an extremly stable high speed suspension,just for me realisticly bolt on stuff should be fine as probably all I'll do is drive to work &...

Re: Hotrod to ####'s Truck Arm Suspension Hey There, Well I don't have any experience w/ HTH's truck arm set up but do have an opinion for you,had a 65 Chev truck years ago,The original Truck Arm Suspension,short bed,somewhat hot,loved the way it handled and always thought that would be...

Hey Turboapache, When you do that swap the clutch MC ends up down on the floor so the stock booster/mc stays in place,check out http://www.garage-scene.com/ It doesn't appear to be a hard job as a matter of fact I'm planning the same thing on a different car some time in the...

Check out Calling all Pro Touring Guys pg 2 of this forum,some good replys,check out liquidh8's wagon,sounds like it sticks like glue,I'm with you there's so may options you could spend a lot of time & money experimenting till you find what you like,Good Luck,KillerDave

Yea I've seen way worse,I don't see any holes in the pics,I think I'd clean it up a bit and see what was left myself before I got carried away with floor pans,Later

Hey Doober, Sounds like the way to go! How you gonna act with 3 extra gears? Should be a blast,If you're worried about tearing one up Rockland Gear has one they're calling Tranzilla,supposed to handle 1200 hp and 1000 ft lbs of torque,then they have Son of Tranzilla which is supposed to...

Well thanks guys,at least it isn't just me,I'm thinking it's just the way these cars are,when they left the factory with little skinny tires no one would ever notice but stuff some big meat up in there and it's a whole new ball game,I did put new frame to body bushings in last summer so maybe...

Re: Another small update - 11-29-08 Hey Guys, Well I made it to Radio Shack the other day,their resistors are in 5-packs @ .99 each I got some 5.5's and tried one on my blue led and it didn't seem to make that much difference,then I tried 3 in a row,still didn't seem to do much so I just...

Is it just me or has anyone else noticed the rear axle on a Malibu seems to be off center toward the passenger side by about a half inch or so? I have an 81 Bu,supposidly a Moser 9" rear,Edelbrock adjustible upper arms,Southside machine lowers,15X8 Crager Street Lights w/ 4" backspace 1/4"...

Re: Another small update - 11-29-08 Hey Doober, Thanks for the advice but that's getting a bit to technical for me for 4 leds,I'll probably just go get an assortment around the values Philip mentioned and play with them a bit,I can't imagine they cost much at all,probably do the Radio Shack...

Re: Another small update - 11-29-08 Your secret's safe with me! Sounds like a good place to start,I guess I'm off to Radio Shack!! Thanks Guys! Dave

Re: Another small update - 11-29-08 Hey Mr.P,Phillip that is, That's going to be a Killer Ride for your young un when you get it all wrapped up! I'm doing something similar although a bit more radical with my guage set up and was wondering about the resistors you used to calm the leds down...

Looks to me like the TRZ's are the way to go and I bet an industrius kind of feller could either find or make some sort of "dust boot" if they were worried about dirt getting in them say in a street driven application like mine,seems to me I saw something similar on Global West's site one day...

Hey Streetbu, I'm afraid I'll have to call brain fade,you are correct 2 lines mean wide ratio and that would be an M-20,I was just on a site that has an extremely informative Muncie ID article and that's what they said,My bad,anyway if anyone's interested it looks like they have a little...

Hey Cheif, I know exactly which one you are looking for,that was hand made fiberglass,some guy up in Canada,I had emailed him and found out all he would take was certified or cashiers checks,I had to think on it a while and by the time I decided to get one poof he's gone,tried to email...

No doubt,same with me,I never have really researched the one I have to find out where it really belongs but it's a big spline,wide ratio with two notches in the input shaft,seems like I read somewhere it's an late 60's early 70's M-21,It came out of a 66 Malibu beater car with a small block my...

Hey It's all good man,from what I've seen here and there along the way if you really want it you can make it happen! Just cut the center out of the crossmember,set the engine down there,figure out what you need,some plate & some tubing,weld er up and bingo bango there she sits! Ideas are always...

Hey Tommy, The Muncie site I've been lookin at is from an outfit called TB Transmission out of Washington state,looks like the same stuff,they also have some cool info on there,and maybe a little better pricing, http://www.tbtrans.com will take you there,check it out! Later,Dave

Hey Tommy, I was just on that site,looks like the same stuff but I don't think it's the same company as I was lookin at,I'll have to remember to look it up at work tomorrow,super cool stuff though,I'm still trying to win the lottery so I can make my automotive fantasy's a reality,buddy of...

Hey Doober, Yep it probably would,the fist thing I'd have to do is get rid of that shroud or whatever you want to call it and make it look like an engine,I'm afraid I'm old school when it come to that,I don't want to pop a hood and look at a bunch of plastic or what have you and wonder...