12 bolt c clip eliminator

[JOHNWOJO]

Not sure which one to order any advice. There is 2 listed for the 12 bolt on the moser site. 1 for a 1.4 seat and 1 for a 1.53. I would assume the rear i have is out of a 72 chevelle. I think that is what Jim the guy i bought car from said. (iwannawheelie)

 

[80montecarlo]

Not sure which one to order any advice. There is 2 listed for the 12 bolt on the moser site. 1 for a 1.4 seat and 1 for a 1.53. I would assume the rear i have is out of a 72 chevelle. I think that is what Jim the guy i bought car from said. (iwannawheelie)

I would pull and axle just to be sure, all you have to do is measure the bearing surface on the shaft, but if you are gunna order aftermarket axles go with the larger ones

 

[monzaz]

Stock GM axles are ALL 1.40 bearing surface diameter

Moser / strange etc can be 1.53 bearing surface diameter

You definitely will have 1.40 if you have stock axles. Period.

9200 is what you will need