any one have a lower control arm frame brakcet start ripping

[C LOWERY]

what size box is that ?

2 X 2
I made a cardboard template then traced it onto the box tubing and used a small air die grinder to fine tune the fit until it fit the way I wanted it.

 

[Anonymous]

The edelbrock tube just braces the LCA mount from pushing out and ties into the upper mount.

The other tube.......
well.....
it is a low buck anti-roll consisting of a ladder bar crossmember welded through the lower control arms. real low tech and I am sure it sees a tremendous amount of force. It was meant to be temporary but it is still in the car

thats what i thought it was ..loll does it leave straight..

 

[red barn]

Car leaves nice and straight. I am running 10.50's NA with that set-up but the plan is to install a true anti-roll over the winter