Lobe Sep. v/s Nitrous

[406bill]

What are the determining factors when choosing to spray a tight lobe sep cam. Ive found that whomever you ask about says 110-112lobe sep thats it.. But I know theres someone that can shed some light on this... BTW its a lunati 40139 flat tappet solid with a 106lobe sep.

 

[Excelerater]

any cam or motor will take spray.....wider lobe seps like it more ...Im on a 116LS

 

[bowtie81]

When you use nitrous and blowers you want a lobe sepration at 112-114 to give the cylinders as much time too fill up to make the most power.

 

[406bill]

so if this is the cam i'm going with the best thing would be to spray it until it doesnt change much? max would be 300. norm 150-200 plate kit.

 

[DFWMalibu]

the tighter LSA will allow the nitrous to flow out during overlap....

Chris K.

 

[Night Stalker]

BTW its a lunati 40139 flat tappet solid with a 106lobe sep.

good cam choice for making power in a N/A app.. As for spraying it,, you'll have to make a choice in the converter selection...Will it be loose for running just motor or running with spray more times than not...
I would choose a converter thats gonna be alittle on the tighter side as so when the NOS is sprayed it'll loosen up to make the motor happpy.