New BMR Control Arm Relocation Brackets

[greer_racing]

I have these and recommend them if you don't want the car to squat

 

[greer_racing]

I've decided to try the middle hole for this season and my pinion angle is -6, should I try and lift the car to seperate the suspension and measure that way? It has a limiter in the back so it'll only drop so far

 

[BMR Sales]

I've decided to try the middle hole for this season and my pinion angle is -6, should I try and lift the car to seperate the suspension and measure that way? It has a limiter in the back so it'll only drop so far

You need to get Adjustable Upper Control Arms - Part # UTCA007 with Poly Bushings or UTCA016 with Spherical Bearings

T.C.

 

[greer_racing]

Have some but they are umi with your brackets, is measuring it on the ground still the right way when its designed to seperate?

 

[Vakivalta]

I bought these when I was completely stock suspension with a 9 inch, had some issues having them clearing the slicks (10 inch) and I didn't like how it drove down the strip. I didn't notice any 60 ft gains either but I'll have to try them again with all my new stuff perhaps.