S10 booster + Trans Am master cylinder mod and install

[Malibutomi]

So i bought a 4 wheel disc 81 TA master cylinder for the brake upgrade, but it didnt fit on my booster, so i got an S10 booster from a friend, which is the same as my old one, except that it works with the bigger MC. But it had a longer brake pedal rod, so i had to mod it.

Boosters face, S10 on the left, malibu on right.

The S10 had much longer rod

So i bought these bolts, to correct it:

Cut it, and tadaaa

Master cylinder on its place:

And finally the 12" upgrade complete:

Tomorrow ill bleed it, and try it!! Cant wait.
In fact it feels much stiffer than the old one even now...i like it

 

[388bu]

Good info! Where did you get that bolt? Got a p/n or anything?

 

[Malibutomi]

Actually its an eye bolt, and an extension nut. I cut the threads on the rod, and bolted together, so now its adjustable
I could get a p/n but dont think you can use it...look my location..
The rod diameter is 3/8", so you can get this size eye bolt i think.

 

[388bu]

Actually its an eye bolt, and an extension nut. I cut the threads on the rod, and bolted together, so now its adjustable
I could get a p/n but dont think you can use it...look my location..
The rod diameter is 3/8", so you can get this size eye bolt i think.

Ok cool. Thanks.