TRZ Motorsports NEW Product - S.S. Brake Lines

[TRZ Motorsports]

We are now offering TRZ Spec'd Stainless Steel Front Brakes lines for all G-bodies, A-bodies, and early F-bodies (and Fox Mustang). D.O.T. Approved. These are designed to work with any aftermarket drag brakes (i.e. Strange, Wilwood, Aerospace). If you're upgrading your front end and brakes this off-season, this will make a nice addition to your list by junking those old sloppy rubber lines Check them out on our website at http://www.trzmotorsports.com/319.html#brakes (just scroll down through the brakes section and you'll see them).

We will also be offering these to work with your FACTORY G, A, and early F-body front brakes as well, this will be available w/in the next few weeks for the same prices. Also, if you need any odd-ball brake line or nitrous lines w/ specific ends, let us know, we may be able to make them up for you.

Thanks,
Todd Braasch
Mike Braasch
TRZ Motorsports
407-933-7385

 

[Michigan10.5bu]

Pics? I assume I'd just need a 1/8" NPT to 3AN fitting in the caliper to make these work then?

 

[TRZ Motorsports]

Strange Brakes come with those adapters already installed. Not sure on the Aerospace or Wilwood. Those adapters can be supplied with the lines if needed, just ask!

Heres a pic:

Mike

 

[CutlassRacer]

FYI, Aerospace calipers just have a 1/8" FNPT hole in them, no fittings included