Gentlemen, I am looking for suggestions on what valvetrain (cam size/type) and cylinder heads to run with my newly aquired 6.0. I don't want to go for a total rebuld at this time. I plan on honing the cylinder walls and installing new rings and bearings. I am looking for a good combonation to run on the street. I want to go as radical as I can with the cam. I will be running a Tremec 6 speed so convertor isn't an issue. I plan on going carberated. This is going into my soon to be pro-touring 79' Malibu. Will need to know what waterpump to run and pan as well. Plan on running manual brakes too. Let me know your suggestions and or if you need anymore info. Thanks in advance for the help.