WHEEL-E-BARS 79 CHEVY MALIBU HELP.

[heavy chevy]

Looking for some installation instructions on setting the height of the wheel-e bars off the ground. the bars i have are the competition engineering 44" which will come out past the back bumper, the rear end is a 9" ford with the stock loc. upper and lower bar's uppers are adj. and have a anti roll bar. the car hooks really well but pulls the front wheels a little high for me. i want the car to work but don't want the wheels way up in the air .so i got a set of wheel-e-bars & i don't want to make them so low that it causes the rear end to unload.

 

[UMI Sales]

Looking for some installation instructions on setting the height of the wheel-e bars off the ground. the bars i have are the competition engineering 44" which will come out past the back bumper, the rear end is a 9" ford with the stock loc. upper and lower bar's uppers are adj. and have a anti roll bar. the car hooks really well but pulls the front wheels a little high for me. i want the car to work but don't want the wheels way up in the air .so i got a set of wheel-e-bars & i don't want to make them so low that it causes the rear end to unload.

Comp says 3-1/2 inches off the ground to start.

This link also includes tuning instructions for the damping springs.

http://www.competitionengineering.com/catalog/images/c2015-c2040_inst.pdf

If you know your part number, here is the page for all the instructions:

http://www.competitionengineering.com/instructions.asp

ramey