Search results

390/410 Thanks

What's the lift on the 929 cam and who makes it

Intake and carb will be like $500 don't want to put that much in my 305

What cam would you suggest and what's the edelbrock Intake part number I have headers already installed on the 305

So the 421"/444" lift will not be to much for the stock SBC 305 with 2 barrel carb?THANKS

I have a 1978 monte Carlo with a stock sbc 305 engine with a 2 barrel carb and the camshaft needs to be replaced what is the stock camshaft lift ratio and is there a aftermarket camshaft that I can get to install in my stock 305 this is my daily driver? Thanks

So are the comp cams 15853 short travel hyd roller lifters all black or are they silver with black rings in the middle and black cutouts on the link bars? Thanks

So the newer version don't have the snap rings in the top of them? thanks

I have a set of older version Comp Cams Retro Hyd. Roller lifters for a SBC(part#853-16) and ordered some replacement ones of the same Comp Cams part number and they seem to look different than the older ones they have the wheels more exposed,have black stripes and black cutouts on the tops and...

Okay

Otay

So is more lift on the intake side good?

So what is the purpose of putting 1.6 rockers on the intake valves which will give the cam more lift than the exhaust lift? ? Thanks

Thats good i have guide plates

Took head off used Playdo and checked piston to valve clearance and all is GOOD so will it be good to install 1.6 rockers on the intake making the cam like 550 on the intake and 540 on the exhaust?THANKS

Duration is 236/242 @.050 engine is running with Comp magnum 1.52 roller tip rockers just changing to full roller rockers.THANKS

I have a Comp Cams Hyd Retro Roller cam in my SBC 355 the cam has 520 lift on the intake with 1.5 rockers and 540 lift on the exhaust with 1.5 rockers and I have a set of 1.6 and 1.5 Crane Cams roller rocker arms and was told to install the 1.6 rockers on the intake and the 1.5 on the exhaust...

Whats the dui part numbers and you saying that all ignitions are the same?

What dui part number?

I have MSD 8365 Pro Billet dizzy in my SBC 406 engine and was thinking will the engine run better if I install a MSD 8360 Pro Billet ready to run dizzy and stand alone coil or is it worth the change if so what can I expect from the MSD 8360 dizzy over the MSD 8365 dizzy?THANKS