--------------------------------------------------------------------------------
400ci SBC, Fed Mogul flat top piston, rebuilt stock length rods, stock crank polish and chamfered oil holes.
Promaxx (Patriot) aluminum heads 195 or 200cc runners,2.02/1.94 valves, 64cc chambers. Aluminum should allow me to run pump gas with the flat tops
Lunati Voodoo hyd. flat tappet 233/241 dur. @ .050, .504/.525 lift. Gotta check valve clearance. Big for the street but I drive 5 miles round trip to work and I want a sound of a healthy cam.
1.5 roller rockers maybe 1.6 if I have enough valve clearance to handle the added .033 lift
Performer RPM air gap intake manifold
650 Holley carb. Small but engine won't see much RPM. probably buy us33ed. Mill off air horn, radius edges and clean off cast lines. I like the small venturi and my last carb I built like this ran good.
That's about it for the major power making parts I plant to run. Plan to run a 2500 stall and 3.73 gears and probably a 2.5 exhaust. My goal is a good balance of horsepower and torgue while staying reliable. What do you guys think? Any input appreciated.
400ci SBC, Fed Mogul flat top piston, rebuilt stock length rods, stock crank polish and chamfered oil holes.
Promaxx (Patriot) aluminum heads 195 or 200cc runners,2.02/1.94 valves, 64cc chambers. Aluminum should allow me to run pump gas with the flat tops
Lunati Voodoo hyd. flat tappet 233/241 dur. @ .050, .504/.525 lift. Gotta check valve clearance. Big for the street but I drive 5 miles round trip to work and I want a sound of a healthy cam.
1.5 roller rockers maybe 1.6 if I have enough valve clearance to handle the added .033 lift
Performer RPM air gap intake manifold
650 Holley carb. Small but engine won't see much RPM. probably buy us33ed. Mill off air horn, radius edges and clean off cast lines. I like the small venturi and my last carb I built like this ran good.
That's about it for the major power making parts I plant to run. Plan to run a 2500 stall and 3.73 gears and probably a 2.5 exhaust. My goal is a good balance of horsepower and torgue while staying reliable. What do you guys think? Any input appreciated.