I bought a racetronix sending unit with a walbro 255LPH installed. It has a -8AN feed line and a -6AN return line. -8AN fittings are welded/brazed onto the sending unit.
I already have -8AN fittings at the fuel rail, -8AN hoses + various other -8AN straight fittings needed etc. Along with the fittings needed for the vette fuel filter/regulator. Planned on purchasing 1/2in SS line to run along the frame rail and use two Swagelok compression -8AN fittings on the ends so I can connection the hose.
I'm worried about pressure drop maybe? From the larger line?
Or should I repurchase everything and buy all -6AN fittings, hose, and SS hard line for the frame rail?
I already have -8AN fittings at the fuel rail, -8AN hoses + various other -8AN straight fittings needed etc. Along with the fittings needed for the vette fuel filter/regulator. Planned on purchasing 1/2in SS line to run along the frame rail and use two Swagelok compression -8AN fittings on the ends so I can connection the hose.
I'm worried about pressure drop maybe? From the larger line?
Or should I repurchase everything and buy all -6AN fittings, hose, and SS hard line for the frame rail?