Any pics of QA1 Springs in your car?

[jakedog]

Hey i was wondering if anyone had pics of the 2 1/2" QA1 springs in the back of their malibu? wanted to see a side view of ride height and under the car of the actual springs how they sit and look?

Also which ones are they? and what the best way to figure which ones?

Thanks !!!!!!!!!!!! :mrgreen:

 

[James Bond]

no picks, but if you know what springs you currently have in the car. you can measure the installed height, back calculate the load on the spring and apply it to one of the billion combinations of 2.5" springs, ie height and rate. i did it this way and it was better than a quarter inch accurate. i actually created a spread sheet with the most common combinations.

 

[darius smith]

12" 130#

 

[shadychevyowner]

you got side picture of ur car i got 14" that 150lbs but i want car lower in rear i was thinking 14" 130 but dont know if 20lbs makes a difference i also thought about 150lb 12inch but i dont want car 2 inchs lower in back yet. i just want to get idea from yours.

 

[darius smith]

 

[darius smith]

sorry bout that i thought that pix was going to be bigger than my avatar