The Summit part# is STR - U1630 it is a 1350 Pinion Yoke Ford 8.8. Copy and paste in the search box @ summitracing.com and it will bring up the part. Will take a few more pictures when I get time.
Baseline 8.8 UCA install
- Thread starter dvanhorn
- Start date
Here are the pictures you ask for.
UCA
LCA (almost parallel with ground)
Shock mount (stock malibu replacements)
UCA
LCA (almost parallel with ground)
Shock mount (stock malibu replacements)
just curious what are you running for a tire and wheel combo,i'm in the process of doing this same swap on a 81 elky,along with a mini tub,i'm thinking of a 15x10 wheel but have no idea about the backspace since the fox rear is narrower
275/60/15 on a 8" wheel with 4.5" b.s. Cut the lip off the finder well. I have about 3/4 on outside and 1" on inside. I do have 68 chevelle springs to lower the rear. I think the overall length is longer on the 8.8.
for some reason i was thinking the fox was shorter,but i will remeasure tommorow,i have a set of 15x10 prostars with 6.5 backspace that i have on a my 86 fox,be nice if they would fit
