BMR relocation brackets

[3caminoman]

Has anybody ran the BMR rear lower control arm relocation brackets? if so what is your opinion.

 

[Betcha618]

they are the same brackets that come with the South Side Machine Lift/Jegster bars. They work.

 

[3caminoman]

might have to try them

 

[UMI Sales]

I just wanted to throw this out their for you guys! That UMI Performance also offers a set of lower control arm relocation brackets. The relocation brackets eliminate wheel hop and increase your traction performance by allowing you to adjust your lower control arm more parallel with the surface. We offer two versions a weld on and a bolt on! Below is a link to show you what we have to offer!
http://www.umiperformance.com/products.php?category_id=17
If you have any other questions feel free to ask and I will be glad to help!
Thanks
Brad cool.gif

 

[Anonymous]

i used relocation brackets from UMI when i bought their control arms, subframe connectors, and panhard bar.

relocation brackets are relocation brackets, all made the same pretty m uch and do the same thing.

 

[Betcha618]

^ YEA, THEY ARE JUST pieces of steel. theres only so many ways you can make them.

 

[BMR Sales]

Hello, our brackets are cold formed steel and not welded. Here is a link to our site. If you have any questions please call me at the office.

http://www.bmrfabrication.com/G-Body.htm

 

[LS6 Tommy]

Hello, our brackets are cold formed steel and not welded. Here is a link to our site. If you have any questions please call me at the office.

http://www.bmrfabrication.com/G-Body.htm

Just out of curiosity, do you think the bolt on brackets will wrok on a 9" with stock style mounts?

Tommy

 

[BMR Sales]

Hello, our brackets are cold formed steel and not welded. Here is a link to our site. If you have any questions please call me at the office.

http://www.bmrfabrication.com/G-Body.htm

Just out of curiosity, do you think the bolt on brackets will wrok on a 9" with stock style mounts?

Tommy

They will work but i would weld them if possible.

 

[Betcha618]

Hello, our brackets are cold formed steel and not welded. Here is a link to our site. If you have any questions please call me at the office.

http://www.bmrfabrication.com/G-Body.htm

if welded right, that makes little difference. I've had the welded ones on my car for over 7 years now, with no issues.