drilling acessory holes

[jessie355]

have a set of 462 casting double humps with 1.94 1.50 valves 64 ccs no accesory holes how can i use these

 

[DOUG213XRJ]

Look for brakets for the power steering and the alternator that dont bolt to the heads.

 

[shaggydjlg]

Look for brakets for the power steering and the alternator that dont bolt to the heads.

Doug what r u trying to say?? Brackets?? Do u mean the spot where they should bolt to but there are no holes there???

 

[DOUG213XRJ]

Yes. There was alternator and power steering on 1965-68 327s . I think they had a short water pump though. Im sure New or used brackets can be used to mount the alternator and power steering with out using the heads if the heads cant be drilled and tapped.

 

[bowtie81]

A buddy of mine had the same problem and he had them drilled and tapped just have to be careful.

 

[79Landau]

You don't need to drill those heads. All you have to do is revamp the alt and power steering brackets as I did . Don't have a pic of P/S bracket but you get the idea.