A few years ago I bought the ClassicTube stainless brake line kit for the car. I am finally installing on my car and I have the front to rear line to add. My line was replaced about 10 years ago but it was made out of 2 lines spliced together. I have debated leaving it there but I prefer one solid line and also the Stainless steel is not a bad choice IMO.
I was seeing if anyone has replaced this line ,in one piece without the body off the frame. It seems to wrap from inside the frame rail over the frame rail just in front of the rear tire well, then it seems to follow the rear crossmember up to the point you connect the flex line to the axle housing.
I was seeing if anyone has replaced this line ,in one piece without the body off the frame. It seems to wrap from inside the frame rail over the frame rail just in front of the rear tire well, then it seems to follow the rear crossmember up to the point you connect the flex line to the axle housing.