Just bought a set of Track 1's for my Monte Carlo Project. Going to go with ARP head bolts, but cannot seam to find a gasket bore size 4.030 on summit. Wanting to go with Fel-Pro Gaskets if I can. Can someone point me in the right direction on where to go?
Motor:
Hyper Pisons
Cam; Duration 295 312 Duration @.50 243 257 Valve Lift .512 .497 Lobe Lift .3200 .3110
Thanks Cory
Motor:
Hyper Pisons
Cam; Duration 295 312 Duration @.50 243 257 Valve Lift .512 .497 Lobe Lift .3200 .3110
Thanks Cory