pics of 15x12 with 295 drag radials...

[Jackstand]

im in the middle of doing my mini tub and frame notch. Still trying to decide what back spacing im going to use. A buddy (thanks jake) had these wheels and tires for his car.BTW the rear end is out of the car because the backsping on his wheels was not near enougth for a 12" wheel

SPECS
12" wheels
295/60
ride height 28"
frame notch is 1/8-3/16 past the seam.

http://jackstandracing.com/wp-content/Scott/DSC00061.JPG
http://jackstandracing.com/wp-content/Scott/DSC00064.JPG
http://jackstandracing.com/wp-content/Scott/DSC00065.JPG

they do fit, but barily. On a 10" wheel they would fit a litte better but still would be tight.. Im going to use a 295...

 

[Jackstand]

btw here is the diffrence the 275 and 295s

http://jackstandracing.com/wp-content/Scott/DSC00058.JPG
http://jackstandracing.com/wp-content/Scott/DSC00057.JPG

 

[10secBu]

OMG, those things are MONSTERS :shock: .

I had 295/65's on 9.5" wheels and they measured 13" through the section width.

 

[JPF]

Those 295's look good,LOL. Allthough they are stretched on those 12" wheels to about what a 315 would be on a 10" wheel. Let me know Scott if you want I'll come out with my fixture for an accurate measurement.

 

[Jackstand]

i freaking thought you said 315's... I'm a dumbass

 

[JPF]

i freaking thought you said 315's... I'm a dumb#$%

LOL, whats the tire say ?