Question about stock front studs and lugnuts on Draglites

[Malibu 361]

Ok, I am running Draglites up front I just got them on a set of 1 le rotors ..im using sst lugnut but the lugs are stock an of course we all know short...So my question is would it pose a problem running the stock studs if the dont stick out of the sst lugnuts..?Or is it not neccessary for them to purtrude all the way out will I be fine with them halfway through?Thanks,Sal

 

[Anonymous]

Re: Question about stock front studs and lugnuts on Draglite

Ok, I am running Draglites up front I just got them on a set of 1 le rotors ..im using sst lugnut but the lugs are stock an of course we all know short...So my question is would it pose a problem running the stock studs if the dont stick out of the sst lugnuts..?Or is it not neccessary for them to purtrude all the way out will I be fine with them halfway through?Thanks,Sal

IMO put longer studs in...not near enough thread engaged with stock studs and draglites

 

[Malibu 361]

what does imo mean and where do you think I can get the studs put in ?who will be able too press them or can they be tapped in?Thanks ...Sal

 

[Anonymous]

Your fine, I have been running them for 3 years now. I just would not do any road racing courses.

 

[Malibu 361]

studs

Yeah im just basically using it for a street strip car ..not really beating on it around the turn...So you have been running yours like that huh....??Thanks very much

 

[Anonymous]

what does imo mean and where do you think I can get the studs put in ?who will be able too press them or can they be tapped in?Thanks ...Sal

in my opinion

I had to measure them (the diameter) and then go to the local parts store and get something close...i ended up drilling my rotors out a little.

i just hammered them in no need to pay someone to press them in