Rear control arm question

[T56elcamino]

I recently bought a Ford 9" and was wondering if I need to put adjustable control arms. Thanks.

 

[melloelky]

i put a nine" in my elcamino didn't have to stockers went in fine.you'd only need them if you were looking to adjust pinion angle

 

[T56elcamino]

thats kinda what i figured, thanks for the reply man.

 

[BMR Sales]

Hello, if the brackets for the control arms are in the right spot you don't need adjustables unless like melloelky stated you need to change your pinion angle. Hope that helps.

 

[UMI Sales]

Hello
I always suggest anytime you go with a aftermarket rear end. To go with at least a single adjustable set up. Some aftermarket rears have there mounting locations offset compared to others. And when you go with a rod end or a roto joint. They will make up for the articulation that is need for the offset and eliminate any binding issues. Below is a link to show you what all UMI Performance has to offer!

http://www.umiperformance.com/catalog/index.php?main_page=index&cPath=8_60_70&zenid=offgo6u92rpc437ugipk3dql60

http://www.umiperformance.com/catalog/index.php?main_page=index&cPath=8_60_71&zenid=offgo6u92rpc437ugipk3dql60

If you have any other questions feel free to ask!
Thanks
Brad