SUPER FAT REAR SWAY BAR???

[HURACANE]

So I have this super fat heavy rear sway bar. Dont remember who I had bought it from. I think I remember the shop used to run a seafoam green regal at the Orlando street nationals. Anyways I assum it just bolts to the lower control arms and thats it. No need for rear end brackets?
Anyone reconize this bar?

 

[UMI Sales]

Hello
That bar is a pig...lol Not to familiar on the design.....sorry. Yes it will just mount right up to your lower control arms. Hopefully you will not have any clearance issues due to the diameter. Some companies make there parts to work with there own. So hopefully it works out for you.
Thanks
Brad

 

[melloelky]

Hello
That bar is a pig...lol Not to familiar on the design.....sorry. Yes it will just mount right up to your lower control arms. Hopefully you will not have any clearance issues due to the diameter. Some companies make there parts to work with there own. So hopefully it works out for you.
Thanks
Brad

he's got a point,i'm running a stock monte ss rear bar under my 9" and it was up against the rearend bigtime!i make brackets that dropped it down about an inch.i can't explain why it happened it just did.

 

[HURACANE]

installed it last night and it fits perfect with my Metco control arms.

 

[UMI Sales]

Glad to hear you go it to fit.....
Take it easy
Brad

 

[UMI Performance]

I know there was an ATR bar that was 1-3/8" and I think Full Throttle still has an 1-3/8" bar as well. Also BMR might have had an 1-1/2" bar at one time if I remember correctly.

Glad to hear it fit good!

 

[Bad Medicine Racing]

I have the Full Throttle 1-3/8" bar on my car and it looks just like that one. It works pretty well too, especially for the price and ease of installation.

 

[Doober]

I'm currently flipping through the current Chevelle magazine and in the parts section there's a Hotchkis G-Body 1 3/8" rear bar.

 

[HURACANE]

i'll have to measure this one tonight. I beleive this bar is bigger than 1-3/8". I am thinking it a 1-7/8"