Tire/Wheel Combo w/stock tubs & frame rail

[Anonymous]

huh

Ok I was thinking of going with a 265/50/15 but the rims I am getting are a 7" I think so I could only go with a 255.

 

[Anonymous]

Last year I ran a 28x12.50x15 Et Street on a 15x8 inch wheel with 3.5 BS. It was very tight and rubbed ever so slightly on the frame rail. This year I'm running the same wheel but with a 296x65r15 ET Street Radial. It fits pretty good but I'm going to cut the wheel lip almost completely off to give myself some more room.

 

[86CUTLASS350]

I HAVE A 86 CUTLASS WITH A STOCK WIDTH 9 IN DO U THINK I CAN FIT A 26/10/15 ET DRAG WITH A 15/8.5 CENTERLINE WITH A 3.5 BACK SPACE

 

[Anonymous]

86cutty

i ran a stock 7.5" with a BF drag 275-50-15 on an 8" weld with 4" b/s and it fit fine, just needed a little fender lip massage.
rob

 

[Anonymous]

Hoosier 28x10,5 slick on 15x8 draglite with 3.5 b/c .. no frame notching just rolled the fender lips......lowered rear of car 3"..

 

[86CUTLASS350]

I HAVE A 86 CUTLASS WITH A STOCK WIDTH 9 IN DO U THINK I CAN FIT A 26/10/15 ET DRAG WITH A 15/8.5 CENTERLINE WITH A 3.5 BACK SPACE

do u guys think this will fit?

 

[Anonymous]

yes