What heads

[blumonte]

Putting together a 350 and not sure what heads to go with. I am going to put new pistons in and hope to have around 11:1 compression. Going to use a solid cam (not sure on that yet either as to what grind I will use) I would like to see as close to 500 as possible at the crank. It will be backed with an auto.Car will be driven on the street but not really worried about it being well mannered. Any suggestions?

 

[87SS]

How about the AFR heads I have for sale here: :mrgreen:

http://www.maliburacing.com/forum/viewtopic.php?f=10&t=75567

Seriously, AFR, Darts, Canfields are all good heads that should give you the numbers you are looking for.

What is the max RPM you would like to hit?

 

[lilbowtie]

Depends on how much you want to spend - Don't go too big on the valves or the runner volume.

 

[C LOWERY]

I am running the GMPP Fast Burn heads. They have a 62 cc combustion chamber. With stock replacement pistins I come in right around 11.0:1 Comp ratio. These heads work VERY well right out of the box. I am very happy with mine. I have considered selling them so I can go to the BRODIX Track1 setup. I just haven't decided if the economy is going to turnaround soon before I spend the money.
Give me a moment and I will track down a part number.

 

[C LOWERY]

Here is the part number and description
https://store.gmperformanceparts.com/store/SelectProd.do?prodId=7605&redir=true&manufacturer=GM&category=Cylinder%20Heads&name=Aluminum%20Fast%20Burn%20Cylinder%20Head%20Assembly%20&model=<!--12464298-->

I run this intake with these heads
https://store.gmperformanceparts.com/store/SelectProd.do?prodId=7605&redir=true&manufacturer=GM&category=Cylinder%20Heads&name=Aluminum%20Fast%20Burn%20Cylinder%20Head%20Assembly%20&model=<!--12464298-->

I really like this combo.

 

[monzaz]

Here is a set I have on ebay right now. All you need to do is buy some valves and springs etc. and put them together. I can even do this for minimal charge. Just moved on to big block stuff. we ahve 2 other sets but they are pretty big 2.05 valves and for roller motors. Not sure you want all that unless your racing.

These heads are great for the street.

Think about it if you want one bid will win them. take care and good luck on the hunt. Jim

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220310917919&sspagename=STRK%3AMESELX%3AIT&viewitem=

 

[monzaz]

Here is a set I have on ebay right now. All you need to do is buy some valves and springs etc. and put them together. I can even do this for minimal charge. Just moved on to big block stuff. we ahve 2 other sets but they are pretty big 2.05 valves and for roller motors. Not sure you want all that unless your racing.

These heads are great for the street.

Think about it if you want one bid will win them. take care and good luck on the hunt. Jim

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220310917919&sspagename=STRK%3AMESELX%3AIT&viewitem=

 

[attngtr]

How about these. Decent price for aluminum heads.

http://cgi.ebay.com/ebaymotors/SBC-CHEVY-PROCOMP-REVISED-210CC-ALUMINUM-HEADS-64CC_W0QQitemZ270302255911QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item270302255911&_trksid=p3911.c0.m14&_trkparms=72%3A727%7C66%3A1%7C65%3A12%7C39%3A1%7C240%3A1318

 

[malihoochie]

[-X Procomp is Chinese junk.

 

[attngtr]

For a mild street/strip combo they will work fine. Some people don't have as deep of pockets and build on a budget.