15X10" wheeel w/ a 28X10.5 tire, how to fit?

[bigpat]

anychance of getting a few picks of the way your sitting Sean sounds nice

 

[Anonymous]

biggest wheel/tire ive been able to fit in my STOCK wheelwells is a 15x8 wheel, 4 1/2 backspacing, with 1/4 inch spacers and 30x9 slicks. i dont think a 15x10 wheel can be used with stock wheelwells. i dont think a 10.5 tire will fit either.

 

[ILLEGAL REGAL]

Here, mine has factory tubs, a frame notch even with the tubs and rolled not trimmed lips. I've got a 28/10.5 et drag with a 9" rim and it fits no problem. I'm gonna try a 10" rim once I get some extra $$$.

 

[4doorbu]

a 28x10.5 tire fits easily with a 15x8 rim with 3.5/4" bs. with the lip rolled.

 

[fast eddie]

i agree with 4drbu

 

[CutlassRacer]

I had 15x8 Welds, 3.5" backspacing and they fit great with only a rolled outer fender lip. I thought they looked pretty good and I would get between 160-200 passes on a set of 28x10.5s cutting high 1.50-low 1.60s 60fts.

 

[Supe]

a 28x10.5 tire fits easily with a 15x8 rim with 3.5/4" bs. with the lip rolled.

I've got that but with 4.5 b/s and a notched frame and there is a TON of room. I had the wheels with that backspacing already and just didn't want to run spacers anymore.

 

[Anonymous]

Just jack it up and get some 36x14's in there

 

[1QwikBu]

im running a 28x11.5x15 on a 8.5" rim no notch a little lip rolling with a bat thats it

 

[STROKER]

:shock: i likey