200-4r swap tips

[Anonymous]

This is just for people doing a search on this. When I changed my 79 malibu from a v6/th350 to 350/200-4r here is a list of parts I needed to install the transmission. I used a holley 600 and gm performance intake.

Iceman 200-4r crossmember and frame exension
CHT7803 200-4r conversion transmission cooler lines from inlinetube.com
stock length driveshaft
HLY-20-95 700r4/200-4r kickdown bracket/throttle bracket
SUM-700202 tv geometry corrector bracket
HLY-20-38 throttle stud
TCI-376600 torque convertor lock up wiring kit
monte carlo ss throttle cable to replace malibu throttle cable

again I used a holley 600 carb so if you use a different carb this list may not apply to you.

 

[art]

Bump! TTT
Thank You!
I could not find those holley part numbers for the throttle studs for the cables anywhere.

 

[Anonymous]

TCI-376600 torque convertor lock up wiring kit

How's that TCI lockup working for you? I have the B&M version, which has a dial to set the point of lockup and a speed sensor to put on the speedo cable, and I am thinking about going with the TCI since there is no dial to set and would make the transmission more independent-ish.

Seems the B&M lockup kit may be overkill (anyone want to buy it?).