I have replaced both front caliper, and put a new manual brake master cly. on my 79bu. It started out with power brakes, I also replaced the complete rearend that I bought also. So basically the whole systems was open.
So I go to bleeding the brake system out, It all seems to be going fine, until I start the car on the jack stands and put it in gear, NO rear brakes at all, it will not stop the tires from rotating at all. I spin the fronts by hand and they seem to stop on a dime. there is a lot of pressure in the front calipers.
Now I try and bleed the rear out again, this time everytime the pedal is pumped and held, I bleed the fluid out, and the pedal sticks all the way down. pull it back up with your foot, pump it up again, bleed it out, pedal sticks. I tried this on the front and it returns just fine
WHY NO REAR BRAKE? AND WHY DOES THE PEDAL STICK WHEN BLEEDING THE BACK?
So I go to bleeding the brake system out, It all seems to be going fine, until I start the car on the jack stands and put it in gear, NO rear brakes at all, it will not stop the tires from rotating at all. I spin the fronts by hand and they seem to stop on a dime. there is a lot of pressure in the front calipers.
Now I try and bleed the rear out again, this time everytime the pedal is pumped and held, I bleed the fluid out, and the pedal sticks all the way down. pull it back up with your foot, pump it up again, bleed it out, pedal sticks. I tried this on the front and it returns just fine
WHY NO REAR BRAKE? AND WHY DOES THE PEDAL STICK WHEN BLEEDING THE BACK?