Did you use a kit or did you use something else? Did you have to modify the 8.8 in any way?labelblack68 said:just did this swap and it works great. used the stock lower gbody control arms and mustang length double adjustable upper control arms. Even the drive shaft did not have to be changed. Just used a ujoint out of the mustang and pressed into the factory driveshaft and used the mustang pinion flange to driveshaft. width on the rear was fine for a 15x8 with 4.5" backspacing.
i have about $200 bucks in this rearBrown_Gbody said:I'm assuming this is a cheaper option than a 9" rear end??