I took some time to measure out as much as I could and came up with the following. Looks to me like the upper arms are angled down too far. I want to get better 60' times, and I'm hoping this is where it is being lost.
108" is the wheelbase and 22" is the CG (center of the cam from the ground), tires are 28" diameter. It would help to know my real weight distribution I assume, but I guessed about 58/42 for this drawing based off of a drawing from baselinesuspensions.
108" is the wheelbase and 22" is the CG (center of the cam from the ground), tires are 28" diameter. It would help to know my real weight distribution I assume, but I guessed about 58/42 for this drawing based off of a drawing from baselinesuspensions.