Do the straight up ones put the back face of the LS motor in the same place as the stock SBC, or the front or what?
Motor mount plates, engine position VS SBC
- Thread starter samckitt
- Start date
I need to know the same thing,i need to keep my trans in the stock location or very close to run my trans, driveshaft and crossmsmber i have thats built to place the back of the motor in the stock location.
I can't remember off the top of my head, but mine are pretty close. My suggestion is to buy the adjustable ones from a company like edelbrock so you can slide it forward or backward up to 1".
samckitt said:
Old style chev engine with distributor = bellhousing flange to lower bolt on block for clamshell measures 16"
LS engine bellhousing flange to lower front bolt on block measures 15"
The straight up ones will give you a 1" gap between the trans and the bellhousing flange on the LS block.
920-660-6895.....Give me a call & ask me how I know this.
peace out
