msd wiring

[Anonymous]

i know i have asked before but i have still had no luck. my 6al do i need a gm hei wire adapter? all i thought was that you pull the 3 wire plug out and plug in the msd but it dosent start so it must have to have both plug in right? any help would be great pictures would be even better of the ditributer with the msd hooked up.thanks

 

[Anonymous]

http://www.msdignition.com/downld1.htm

 

[Anonymous]

thanks but all i see is wiring that i thought it would go. but the question is is the old wiring plug back into the coil part?

 

[Anonymous]

the wires get unplugged and go to the msd wires with jumpers to the module.

give me a minute...

 

[Anonymous]

here:

http://www.msdignition.com/pdf/6%20series/pdf14.pdf

 

[Anonymous]

got it thanks alot man try that tommorow ill let you know

 

[Anonymous]

I like to lose the module my self and plug the pickup right in to the mag pickup. cleaner and gets rid of a part that can let you down. The harness is just a pigtail to plug into your pickup coile with the msd plug on the other end.

http://www.msdignition.com/pdf/6%20series/pdf13.pdf