My Monte will soon have a new heart.....

[StreetBu]

Just bolt on a cable style t-body but you MUST get a cable style pcm too....

 

[samckitt]

Just bolt on a cable style t-body but you MUST get a cable style pcm too....

I am not sure that is all, I don't think you can run a drive-by-wire TB if your motor has a 58 tooth reluctor wheel.

 

[samckitt]

A few updates, some new parts showed up recently.

New LS3 heads:

Patriot springs:

Practically new Camaro LS3 intake:

Charcoal painted front cover:

Single bolt cam installation tool I made from a bolt I cut the head off of & welded it to some 3/4" dia pipe:

 

[vickysbu]

Just bolt on a cable style t-body but you MUST get a cable style pcm too....

I am not sure that is all, I don't think you can run a drive-by-wire TB if your motor has a 58 tooth reluctor wheel.

You can run a cable tb with a 58x reluctor. You will need the 58x to 24x conversion box that Lingenfelter perf makes.
As for making sure your pcm will cooperate with the iac on the cable tb, check out this link: http://lt1swap.com/cable_conversion.htm