need info on wheel spacers

[79izfine]

to start i bought a set of greg weld dragster wheels and the hub depth to center cap is to shallow in the front so im faced with retuning them or run spacers with 15 x 7 and 4 " b/s and rear with 15 x 8 4.50 b/s saftey in mind the spacers i found are trans dapt that are 1" thick and have holes ti fit on the studs that require open end lugs then have five studs pressed into them pic below just want to get some opinions on this set up my car is not for racing its just a street cruiser thanks

 

[lurchsmalibu]

The spacer would appear to work OK as long as you don't do any running from the cops or Auto X'ing. Just keep tabs on the lug nuts staying tight and any possible stress cracks in the spacer after a few thousand mile intervals.

Those rims are a nice selection too. 8)

 

[79izfine]

thanks for the info i found out the company is making a new style center cap so i wont have to run the spacers i just have to wait 6 to 8 weeks