Pace Performance Stainless Roller Rockers for mild cam??

[87Aero]

I'm on a budget, and need a set of self aligning rockers. I'm considering these since I still have a stock Vortec truck cam, and don't plan to see anything north of 5000 RPM. This is just going to be a driver for now.

http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=177970

 

[D&A Machine Shop]

Check out the PRW rockers, we use alot of them and havent had a failure yet, If the aluminum rockers wont work then they make a stainless rocker as well.
We use them on dirt track engines that see around 7000 rpm.
http://cgi.ebay.com/ebaymotors/PRW-High-Perf-Aluminum-Rockers-SB-Chevy-Self-Aligning-/110551747629?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item19bd65cc2d

 

[87Aero]

I'm on a budget, and need a set of self aligning rockers. I'm considering these since I still have a stock Vortec truck cam, and don't plan to see anything north of 5000 RPM. This is just going to be a driver for now.

http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=177970

I'm going with something else, I called and those are made in china!

 

[D&A Machine Shop]

Most buget rockers are made in china, I think the PRW stuff is made there too but they are the only
offshore brand that we have been happy with.

 

[87Aero]

What have you had as far as failures with the PRWs?

I'm scared to trash something in my valve train, so I'm really considering going with Com Cams roller tip since its going to be street driver.

 

[D&A Machine Shop]

Zero failures so far.
The pin for the roller is pressed in and has a clip on the opposite side, the roller pin is where
most falures will come from because it will walk out and with the PRW rockers that can"t really happen.

Andy

 

[Supe]

Honestly, if you're looking to put it on a DD and under 5000 rpm, I wouldn't waste my money on roller rockers.

 

[DFWMalibu]

I have the comp cams aluminum SA rockers and they fit with stock vortec valve covers...