pedal confusion?

[el meano]

it turns out that a buddy of mine was junking a fiero, so i snagged the pedals. they looked pretty similar to newer camaro pedals and they had a master cylender on them, so good score in my book. i want to run theese with a hydraulic throwout bearing for a clean and uncluttered instalation. i cant be dealing with mechanical linkage with my longtube headers, and this stuff was free.

i have pics, but need to email them to someone , if you guys think theese will work.

 

[t5montecarlo]

There are a few long tube headers that fit with mechanical linkage.

With hydraulics, be careful where you route the tubing; keep it away from the headers.

Are the fiero pedals the same length, from pivot to pad, as the Malibu pedals? If so, try and mount them to the Malibu firewall bracket, rather than try and fit the Fiero bracket to the firewall.

 

[el meano]

if this makes any more sence, it seems that the clutch pedal from the fiero setup will unbolt, and bolt(or weld) to my existing brake pedal. the fiero steering shaft runs through the middle of the brake and clutch pedal, making them akward in my car. but the master bracket/clutch pedal seem perfect. i can email pics so this stuff makes more sence, im looking at it, and its giving me a headache, i can imagine trying to picture it.

thanks t5MC