Pulling Engine

[gbodyera]

Is it hard to pull an engine and leave the trans in? I know I have to unbolt 6 bellhousing bolts, motor mounts and Im ready to go.What do I have to do?

 

[DFWMalibu]

remember to also unbolt the torque convertor....

Chris K.

 

[gbodyera]

I've never done this before. Is it hard? how many bolts and where are they?

 

[DFWMalibu]

there are 3 bolts and they are on the flywheel... you'll have to remove 1 turn the crank some remove another etc.

Chris K.

 

[bowtie81]

There is only 3 bolts and they are attached to the flywheel, you'll have to bump the motor over to get at them. put something under the transmission to support it when the motor comes out.

 

[gbodyera]

Ok. Thanx buddy.