t56 swap

[blubaldmontess]

OK, just thought I'd ask as many of you put the T56 in your cars when you swapped...I want one now lol. So when you did your swap, did you have to change anything else besides pedals? I am going to buy a t56 and the clutch and bellhousing, and I already have the lsx block in the car. Basically I want to keep it hydraulic, but don't know what else I have to hook up to it, or if its self contained?

Thanks guys

Otis

 

[80bu]

I am putting one in my car now. I have the pedals for a hydraulic setup i bought from a guy off of mcss. I have a iceman crossmember but it seem s the trany hangs a bit low.You will need a clutch master cyclinder and slave cylinder. If you had cruise control you will already have a a hole for the clutch master cyclinder location. the guy I bought the pedal from give me the template for this also, he is a real good guy to deal with!!

 

[BAD78BU]

post the template, also how much floor damage to be done. What angle is your tail shaft